SKU: STHC-X is a Smart IoT Gateway, aka iConnector, with Ex d approved by ATEX, a main component in any IoT application. iConnector has a role to connect the real World's things like wireless sensor, meters, ,machines...to server system for data logging, data analytics, monitoring & controls...iConnector support multiple Industrial Fieldbus like Modbus, EthernetIP, Profinet, CClink, Wireless sensor network...

It connects to server system via LAN/WAN as Ethernet, WiFi or Cellular. STHC-X can be installed in Zone 1 or Zone 2.

HIGHLIGHT FEATURES

1. 3-in-1 Device: iConnector is a 3-in1 device, comprises Data logger + Logic Controller + Internet Gateway
2. NO need Programming: Don't need to learn any Programming language, just configure it remotely by Globiots platform
3. Just 2-step for using: Just install and configure it remotely on Globiots, then you can start use it!
4. Multiple Fieldbus Protocols: Support multiple Fieldbus protocols like Modbus, EthernetIP, Profinet, CCink...
5. Since 2014!: Industrial customers have been using iConnectors since 2014 because of its quality!

SPECIFICATION

• Host Communication Cellular type: GPRS Quadband (850/900/1800/1900)/3G-Dual band (2100/900)/3G- Penta Band (2100/1900/850/850Japan/900/800Japan), external antenna
• Host Communication Etherner type: 01 x RJ45 port, 10Mbps
• Host Communication WiFi type: 802.11b/g/n, 2.4Ghz, external antenna
• Host communication supports: TCP/IP, UDP/IP, FTP, HTTPS, SNMP, MQTT...
• Fieldbus communcation: ModbusRTU x 01 port, 31 slaves, max 19.2 kpbs
• Wireless connections: Optional built-in wireless bridge or wireless co-ordinator

ORDERING INFORMATION

• ITEM CODE: DESCRIPTIONS
• STHC-X-ISG02DB: iConnector 3G Dual Band, Ex d, external GSM antenna 2.3 dbi N-male, RS485/ModbusRTU
• STHC-X-ISG02: iConnector 3G Penta Band, Ex d, external GSM antennal 2.3 dbi N-male, RS485/ModbusRTU
• STHC-X-ISGWF: iConnector WiFi, Ex d, external WiFi antenna 4.48 dbi N-male, RS485/ModbusRTU
• STHC-X-ISGETH: iConnector Ethernet, Ex d, RS485/ModbusRTU

Wireless co-ordinator - WS433-R (old name is WR433) is a wireless co-ordinator in a wireless sensor network. It is able to configure the parameters for all end nodes in the network. By the Sub-Ghz technology from Texas Instruments, it is easy to establish multiple networks in same area without interference or channel conflict. One co-ordinator can handle maximum of 40 end nodes in its network.

HIGHLIGHT FEATURES

1. Reliable & Secured Wireless Connection: Sub-Ghz technology from Texas Instruments allows reliable wireless connection and secured data by AES-128
2. Long range Transmission: Narrow Band techniques & Sub-Ghz technology allow long distance transmisison at lowest energy consumption
3. Strong functions: Allow to configure and diagnostic each sensor node in the network to make sure the highest reliability
4. Simple Configuration: Easily configure via off-line software or online software on Globiots platform

Wireless Relay output module (SKU: WS433-RL), select SPDT or SPST contacts, select 2 or 4 channels, to control your motor, pump, valve, door, alarm, lighting, machines…It is configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software.

HIGHLIGHT FEATURES

1. Reliable & Secured Wireless sensors Connection: Sub-Ghz technology from Texas Instruments allows reliable wireless connection and secured data by AES-128
2. Long range Transmission: Narrow Band techniques & Sub-Ghz technology allow long distance transmisison at lowest energy consumption
3. Multiple types of contact: Select SPST or SPDT contacts, 2 or 4 channels

SPECIFICATION

• Outputs: 02 x SPDT relay or 04 x SPST relay
• SPST contacts: 0.3A@125VAC/1.0A@24VDC
• SPDT contacts: 5.0A@250VAC
• Functions: ON/OFF
• Electrical connection: cable 0.5m length with PG9 cable gland
• Optional accessories: 304SS Adapter PG9/male 1/2"NPT or PG13.5 or M20 to allow direct mounting on Process instruments or electrical panel
• Data speed: Up to 50kbps
• Tranmission distance, LOS: 500m
• Antenna: Internal Antenna, 3 dbi
• Power: 7-60VDC, max 200mA
• Frequency Band: ISM 433Mhz, Sub-GHz technology from Texas Instrument, USA
• Receiving Sensitivity: -110dBm at 50kbps
• International Compliance: ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan)
• Security Standard: AES-128
• Operating temperature of PCB: -40oC..+60oC (with AA L91 Energizer)
• Housing: Poly-carbonate, IP67
• Installation method: L-type bracket SUS304 , by M4 screws or double-sided 3M tape (included)
• Product dimensions: 125x30x30mm
• Net weight (without battery): < 100g
• Box dimension: 190x50x50mm
• Gross weight: 140g

Wireless sensor with 1-channel AC (SKU: WS433-AC) current input 5A to measure the AC current load of your motors, machines...to count the energy consumption, OVER-load or NO-load detection, run hour counting…It is configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software. 

"The wireless module can last up to 10 years with a single AA battery."

HIGHLIGHT FEATURES

1. Reliable & Secured Wireless Connection
2. 10-year with a single battery
3. Work with common Current Transformers
4. Long range Transmission

SPECIFICATION PRODUCTS: 

• Measuring range: 0..5A AC
• Accuracy: 1.0%
• Resolution: 10 bit
• Temperature Drift: < 100 ppm
• Electrical connection: cable 0.5m length with PG9 cable gland and wire crimpping connectors for SAFETY
• Optional accessories: 304SS Adapter PG9/male 1/2""NPT or PG13.5 or M20 to allow direct mounting on Process instruments or electrical panel
• Data speed: Up to 50kbps
• Tranmission distance, LOS: 500m

POPULAR USE CASES:

• Smart Server Room – MONITORING DATA CENTER SOLUTION
• Solution of refrigerated container power supply monitoring on barge

Wireless sensor with one channel to measure 0-20mA DC current from Process instruments like Pressure transmitter, Temperature transmitter, Level transmitter, Flow meters, Analyzers... at very low voltage drop. It is configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software. 

"The wireless module can last up to 10 years with a single AA battery."

SKU: WS433-MA

HIGHLIGHT FEATURES OF PRODUCTS:

1. Reliable & Secured Wireless Connection
2. 10-year with a single battery
3. Low Voltage Drop
4. Long range Transmission

SPECIFICATION

• Measuring range: 0 .. 20mA
• Accuracy: 0.05% of span
• Resolution: 1/3000
• Temperature drift: < 50ppm
• Electrical connection: shielded cable 0.5m length with PG9 cable gland
• Optional accessories: 304SS Adapter PG9/male 1/2"NPT or PG13.5 or M20 to allow direct mounting on Process instruments or electrical panel
• Data speed: Up to 50kbps
• Tranmission distance, LOS: 500m

POPULAR USE CASES:

• Smart Server Room – MONITORING DATA CENTER SOLUTION
• Wireless sensor network replaces traditional 4-20mA wired network

Process Pressure Wireless Sensor Module PPS have different kind of measurement, such as Gage/Absolute/Differential, raneg -1 .. + 700 bar, high accuracy and stability, Ultra-low power consumption. Easy connect to WS433-M12(-T) via M12 connector.

SPECIFICATION:

• Sensing Technology: Advanced PIEZO/Capacitance technology
• Measuring range: Select from -1 .. + 35 bar Gage/Absolute/Sealed Gage
• Over pressure protection: 1.5 x Span
• Accuracy: 0.5% of span
• Stability: < 0.3% span/year
• Wetted parts: 304SS/316SS
• Measuring Fluids: Any fluid which is workable with materials 304SS/316SS
• Working temperature: -10 .. + 80 oC
• Process connection Standard G1/4 or Others (consult factory)
• Electrical connection: M12-male connector

Ambient Humidity & Temperature Sensor Module ATH utilizes digital sensor delivers high accuracy measurement. Easy connect to WS433-M12(-T) via M12 connector.

HIGHLIGHT FEATURES

• Plug & Play
• Just plug the pressure module onto WS433-M12F via M12 connector, then it works automatically
• Multiple types
• Compact type or cable extionsion type to suite variety applications
• High accuracy
• Digital sensor with factory-calibration
• Sintered Filter
• Alloy sintered filter to protect sensor in hash environment

• See more: MODULE AMBIENT TEMPERATURE SENSOR

SPECIFICATION

• Sensor: Digital type, factory calibrated, output both Humidity & Temperature values
• Humidity measuring range: 0 .. 100 %RH
• Humidity accuracy: +/- 2.0%
• Humidity resolution: 0.1%
• Temperature measuring range: -40 .. + 85 oC
• Temperature accuracy: +/- 0.2 oC
• Temperature resolution: 0.1 oC
• Sensor Filter: 20um Alloy sintered filter
• Electrical connection: M12-male connector